| Electrical Specification | HXPA 0.8 D 180 FR | HXPA 1.2 D 180 FR | HXPA 1.5 D 180 FR | HXPA 1.8 D 180 FR |
| Operating Frequency | 17.700–19.700 GHz | |||
| Diameter | 0.8 m | 1.2 m | 1.5 m | 1.8 m |
| Gain mid-band | 40.5 dBi | 44.0 dBi | 46.0 dBi | 47.5 dBi |
| Polarization | Linear Duplex (Vertical and Horizontal) | |||
| Half-Power Beamwidth | 1.4° | 0.9° | 0.7° | 0.6° |
| Return Loss | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB |
| Front-to-Back Ratio | 70 dB | 72 dB | 75 dB | 76 dB |
| Cross-Polar Discrimination | 36 dB | 36 dB | 36 dB | 36 dB |
| Inter-Port Isolation | 42 dB | 42 dB | 42 dB | 42 dB |
| Flange2 | Upon Customer’s Request | |||
| Mechanical Specification | HXPA 0.8 D 180 FR | HXPA 1.2 D 180 FR | HXPA 1.5 D 180 FR | HXPA 1.8 D 180 FR |
| Net Weight3 | 26 kg | 62 kg | 85 kg | 146 kg |
| Antenna Pointing Range | HXPA 0.8 D 180 FR | HXPA 1.2 D 180 FR | HXPA 1.5 D 180 FR | HXPA 1.8 D 180 FR |
| Azimuth fine | ±20° | ±15° | ±5° | ±5° |
| Elevation fine | ±30° | ±20° | ±5° | ±5° |
| Material and Finish | HXPA 0.8 D 180 FR | HXPA 1.2 D 180 FR | HXPA 1.5 D 180 FR | HXPA 1.8 D 180 FR |
| Mount | Hot-Dip-Galvanized Steel | |||
| Installation Hardware | Stainless Steel | |||
| Feed | Aluminium | |||
| Environmental Specification | HXPA 0.8 D 180 FR | HXPA 1.2 D 180 FR | HXPA 1.5 D 180 FR | HXPA 1.8 D 180 FR |
| Operating Windspeed | 120 km/h | |||
| Survival Windspeed | 220 km/h | |||
| Ambient Temperature | −55°C…+55°C | |||
| ETSI Standard | HXPA 0.8 D 180 FR | HXPA 1.2 D 180 FR | HXPA 1.5 D 180 FR | HXPA 1.8 D 180 FR |
| Range | 2 | 2 | 2 | 2 |
| Class | 3 | 3 | 3 | 3 |
1 Coaxial cable connector, standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interfaces). Clamps, adjustment system, and side strut are included.
