GRANTE Antenna Fejlesztő és Gyártó Zrt.

logos.jpg

High Performance Antennas (HPA)

HPA – 110 Series Specification

Antenna Ordering
HPA 110 Datasheet (pdf)

HPA S 110 Series

Electrical SpecificationHPA 0.6 S 110 FRHPA 0.8 S 110 FRHPA 1.2 S 110 FRHPA 1.5 S 110 FRHPA 1.8 S 110 FR
Operating Frequency10.700–11.700 GHz
Diameter0.6 m0.8 m1.2 m1.5 m1.8 m
Gain mid-band33.9 dBi36.4 dBi40.0 dBi41.9 dBi43.5 dBi
PolarizationLinear Simplex (Vertical or Horizontal)
Half-Power Beamwidth3.1°2.3°1.6°1.3°1.0°
Return Loss−17.7 dB−17.7 dB−17.7 dB−17.7 dB−17.7 dB
Front-to-Back Ratio60 dB63 dB67 dB69 dB70 dB
Cross-Polar Discrimination30 dB30 dB32 dB32 dB32 dB
Flange1Upon Customer’s Request
Mechanical SpecificationHPA 0.6 S 110 FRHPA 0.8 S 110 FRHPA 1.2 S 110 FRHPA 1.5 S 110 FRHPA 1.8 S 110 FR
Net Weight214 kg26 kg48 kg85 kg146 kg
Antenna Pointing RangeHPA 0.6 S 110 FRHPA 0.8 S 110 FRHPA 1.2 S 110 FRHPA 1.5 S 110 FRHPA 1.8 S 110 FR
Azimuth fine±20°±20°±15°±5°±5°
Elevation fine±30°±30°±20°±5°±5°
Material and FinishHPA 0.6 S 110 FRHPA 0.8 S 110 FRHPA 1.2 S 110 FRHPA 1.5 S 110 FRHPA 1.8 S 110 FR
MountHot-Dip-Galvanized Steel
Installation HardwareStainless Steel
FeedAluminium
Environmental SpecificationHPA 0.6 S 110 FRHPA 0.8 S 110 FRHPA 1.2 S 110 FRHPA 1.5 S 110 FRHPA 1.8 S 110 FR
Operating Windspeed120 km/h
Survival Windspeed220 km/h
Ambient Temperature−55°C…+55°C
ETSI StandardHPA 0.6 S 110 FRHPA 0.8 S 110 FRHPA 1.2 S 110 FRHPA 1.5 S 110 FRHPA 1.8 S 110 FR
Range11111
Class33333

1 Standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.

HPA D 110 Series

Electrical SpecificationHPA 0.6 D 110 FRHPA 0.8 D 110 FRHPA 1.2 D 110 FRHPA 1.5 D 110 FRHPA 1.8 D 110 FR
Operating Frequency10.700–11.700 GHz
Diameter0.6 m0.8 m1.2 m1.5 m1.8 m
Gain mid-band33.9 dBi36.4 dBi40.0 dBi41.9 dBi43.5 dBi
PolarizationLinear Duplex (Vertical and Horizontal)
Half-Power Beamwidth3.1°2.3°1.6°1.3°1.0°
Return Loss−17.7 dB−17.7 dB−17.7 dB−17.7 dB−17.7 dB
Front-to-Back Ratio60 dB63 dB67 dB69 dB70 dB
Cross-Polar Discrimination30 dB30 dB32 dB32 dB32 dB
Flange1Upon Customer’s Request
Mechanical SpecificationHPA 0.6 D 110 FRHPA 0.8 D 110 FRHPA 1.2 D 110 FRHPA 1.5 D 110 FRHPA 1.8 D 110 FR
Net Weight214 kg26 kg48 kg85 kg146 kg
Antenna Pointing RangeHPA 0.6 D 110 FRHPA 0.8 D 110 FRHPA 1.2 D 110 FRHPA 1.5 D 110 FRHPA 1.8 D 110 FR
Azimuth fine±20°±20°±15°±5°±5°
Elevation fine±30°±30°±20°±5°±5°
Material and FinishHPA 0.6 D 110 FRHPA 0.8 D 110 FRHPA 1.2 D 110 FRHPA 1.5 D 110 FRHPA 1.8 D 110 FR
MountHot-Dip-Galvanized Steel
Installation HardwareStainless Steel
FeedAluminium
Environmental SpecificationHPA 0.6 D 110 FRHPA 0.8 D 110 FRHPA 1.2 D 110 FRHPA 1.5 D 110 FRHPA 1.8 D 110 FR
Operating Windspeed120 km/h
Survival Windspeed220 km/h
Ambient Temperature−55°C…+55°C
ETSI StandardHPA 0.6 D 110 FRHPA 0.8 D 110 FRHPA 1.2 D 110 FRHPA 1.5 D 110 FRHPA 1.8 D 110 FR
Range11111
Class33333

1 Circular waveguide with 20 mm diameter, or direct mounted Orthomode transducer with ODU interfaces and/or standard waveguide flanges.
For more information about orthomode transducers please visit the OMT page.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.