| Electrical Specification | HPA 0.6 S 100 FR | HPA 0.8 S 100 FR | HPA 1.2 S 100 FR | HPA 1.5 S 100 FR | HPA 1.8 S 100 FR |
| Operating Frequency | 10.100–10.700 GHz | ||||
| Diameter | 0.6 m | 0.8 m | 1.2 m | 1.5 m | 1.8 m |
| Gain mid-band | 33.3 dBi | 35.8 dBi | 39.3 dBi | 41.3 dBi | 42.8 dBi |
| Polarization | Linear Simplex (Vertical or Horizontal) | ||||
| Half-Power Beamwidth | 3.4° | 2.5° | 1.7° | 1.3° | 1.1° |
| Return Loss | −20.8 dB | −20.8 dB | −23.1 dB | −23.1 dB | −26.4 dB |
| Front-to-Back Ratio | 60 dB | 63 dB | 66 dB | 69 dB | 70 dB |
| Cross-Polar Discrimination | 30 dB | 30 dB | 32 dB | 32 dB | 32 dB |
| Flange1 | Upon Customer’s Request | ||||
| Mechanical Specification | HPA 0.6 S 100 FR | HPA 0.8 S 100 FR | HPA 1.2 S 100 FR | HPA 1.5 S 100 FR | HPA 1.8 S 100 FR |
| Net Weight2 | 14 kg | 26 kg | 62 kg | 85 kg | 146 kg |
| Antenna Pointing Range | HPA 0.6 S 100 FR | HPA 0.8 S 100 FR | HPA 1.2 S 100 FR | HPA 1.5 S 100 FR | HPA 1.8 S 100 FR |
| Azimuth fine | ±20° | ±20° | ±15° | ±5° | ±5° |
| Elevation fine | ±30° | ±30° | ±20° | ±5° | ±5° |
| Material and Finish | HPA 0.6 S 100 FR | HPA 0.8 S 100 FR | HPA 1.2 S 100 FR | HPA 1.5 S 100 FR | HPA 1.8 S 100 FR |
| Mount | Hot-Dip-Galvanized Steel | ||||
| Installation Hardware | Stainless Steel | ||||
| Feed | Aluminium | ||||
| Environmental Specification | HPA 0.6 S 100 FR | HPA 0.8 S 100 FR | HPA 1.2 S 100 FR | HPA 1.5 S 100 FR | HPA 1.8 S 100 FR |
| Operating Windspeed | 120 km/h | ||||
| Survival Windspeed | 220 km/h | ||||
| Ambient Temperature | −55°C…+55°C | ||||
| ETSI Standard | HPA 0.6 S 100 FR | HPA 0.8 S 100 FR | HPA 1.2 S 100 FR | HPA 1.5 S 100 FR | HPA 1.8 S 100 FR |
| Range | 1 | 1 | 1 | 1 | 1 |
| Class | 3 | 3 | 3 | 3 | 3 |
1 Standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.
| Electrical Specification | HPA 0.6 D 100 FR | HPA 0.8 D 100 FR | HPA 1.2 D 100 FR | HPA 1.5 D 100 FR | HPA 1.8 D 100 FR |
| Operating Frequency | 10.100–10.700 GHz | ||||
| Diameter | 0.6 m | 0.8 m | 1.2 m | 1.5 m | 1.8 m |
| Gain mid-band | 33.1 dBi | 35.6 dBi | 39.1 dBi | 41.1 dBi | 42.6 dBi |
| Polarization | Linear Duplex (Vertical and Horizontal) | ||||
| Half-Power Beamwidth | 3.4° | 2.5° | 1.7° | 1.3° | 1.1° |
| Return Loss | −20.8 dB | −20.8 dB | −20.8 dB | −20.8 dB | −23.1 dB |
| Front-to-Back Ratio | 60 dB | 63 dB | 66 dB | 69 dB | 70 dB |
| Cross-Polar Discrimination | 30 dB | 30 dB | 32 dB | 32 dB | 32 dB |
| Inter-Port Isolation | 40 dB | 40 dB | 40 dB | 40 dB | 40 dB |
| Flange2 | Upon Customer’s Request | ||||
| Mechanical Specification | HPA 0.6 D 100 FR | HPA 0.8 D 100 FR | HPA 1.2 D 100 FR | HPA 1.5 D 100 FR | HPA 1.8 D 100 FR |
| Net Weight3 | 14 kg | 26 kg | 62 kg | 85 kg | 146 kg |
| Antenna Pointing Range | HPA 0.6 D 100 FR | HPA 0.8 D 100 FR | HPA 1.2 D 100 FR | HPA 1.5 D 100 FR | HPA 1.8 D 100 FR |
| Azimuth fine | ±20° | ±20° | ±15° | ±5° | ±5° |
| Elevation fine | ±30° | ±30° | ±20° | ±5° | ±5° |
| Material and Finish | HPA 0.6 D 100 FR | HPA 0.8 D 100 FR | HPA 1.2 D 100 FR | HPA 1.5 D 100 FR | HPA 1.8 D 100 FR |
| Mount | Hot-Dip-Galvanized Steel | ||||
| Installation Hardware | Stainless Steel | ||||
| Feed | Aluminium | ||||
| Environmental Specification | HPA 0.6 D 100 FR | HPA 0.8 D 100 FR | HPA 1.2 D 100 FR | HPA 1.5 D 100 FR | HPA 1.8 D 100 FR |
| Operating Windspeed | 120 km/h | ||||
| Survival Windspeed | 220 km/h | ||||
| Ambient Temperature | −55°C…+55°C | ||||
| ETSI Standard | HPA 0.6 D 100 FR | HPA 0.8 D 100 FR | HPA 1.2 D 100 FR | HPA 1.5 D 100 FR | HPA 1.8 D 100 FR |
| Range | 1 | 1 | 1 | 1 | 1 |
| Class | 3 | 3 | 3 | 3 | 3 |
1 Standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.
