| Electrical Specification | HPA 0.6 S 110 FR | HPA 0.8 S 110 FR | HPA 1.2 S 110 FR | HPA 1.5 S 110 FR | HPA 1.8 S 110 FR |
| Operating Frequency | 10.700–11.700 GHz | ||||
| Diameter | 0.6 m | 0.8 m | 1.2 m | 1.5 m | 1.8 m |
| Gain mid-band | 33.9 dBi | 36.4 dBi | 40.0 dBi | 41.9 dBi | 43.5 dBi |
| Polarization | Linear Simplex (Vertical or Horizontal) | ||||
| Half-Power Beamwidth | 3.1° | 2.3° | 1.6° | 1.3° | 1.0° |
| Return Loss | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB |
| Front-to-Back Ratio | 60 dB | 63 dB | 67 dB | 69 dB | 70 dB |
| Cross-Polar Discrimination | 30 dB | 30 dB | 32 dB | 32 dB | 32 dB |
| Flange1 | Upon Customer’s Request | ||||
| Mechanical Specification | HPA 0.6 S 110 FR | HPA 0.8 S 110 FR | HPA 1.2 S 110 FR | HPA 1.5 S 110 FR | HPA 1.8 S 110 FR |
| Net Weight2 | 14 kg | 26 kg | 48 kg | 85 kg | 146 kg |
| Antenna Pointing Range | HPA 0.6 S 110 FR | HPA 0.8 S 110 FR | HPA 1.2 S 110 FR | HPA 1.5 S 110 FR | HPA 1.8 S 110 FR |
| Azimuth fine | ±20° | ±20° | ±15° | ±5° | ±5° |
| Elevation fine | ±30° | ±30° | ±20° | ±5° | ±5° |
| Material and Finish | HPA 0.6 S 110 FR | HPA 0.8 S 110 FR | HPA 1.2 S 110 FR | HPA 1.5 S 110 FR | HPA 1.8 S 110 FR |
| Mount | Hot-Dip-Galvanized Steel | ||||
| Installation Hardware | Stainless Steel | ||||
| Feed | Aluminium | ||||
| Environmental Specification | HPA 0.6 S 110 FR | HPA 0.8 S 110 FR | HPA 1.2 S 110 FR | HPA 1.5 S 110 FR | HPA 1.8 S 110 FR |
| Operating Windspeed | 120 km/h | ||||
| Survival Windspeed | 220 km/h | ||||
| Ambient Temperature | −55°C…+55°C | ||||
| ETSI Standard | HPA 0.6 S 110 FR | HPA 0.8 S 110 FR | HPA 1.2 S 110 FR | HPA 1.5 S 110 FR | HPA 1.8 S 110 FR |
| Range | 1 | 1 | 1 | 1 | 1 |
| Class | 3 | 3 | 3 | 3 | 3 |
1 Standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.
| Electrical Specification | HPA 0.6 D 110 FR | HPA 0.8 D 110 FR | HPA 1.2 D 110 FR | HPA 1.5 D 110 FR | HPA 1.8 D 110 FR |
| Operating Frequency | 10.700–11.700 GHz | ||||
| Diameter | 0.6 m | 0.8 m | 1.2 m | 1.5 m | 1.8 m |
| Gain mid-band | 33.9 dBi | 36.4 dBi | 40.0 dBi | 41.9 dBi | 43.5 dBi |
| Polarization | Linear Duplex (Vertical and Horizontal) | ||||
| Half-Power Beamwidth | 3.1° | 2.3° | 1.6° | 1.3° | 1.0° |
| Return Loss | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB |
| Front-to-Back Ratio | 60 dB | 63 dB | 67 dB | 69 dB | 70 dB |
| Cross-Polar Discrimination | 30 dB | 30 dB | 32 dB | 32 dB | 32 dB |
| Flange1 | Upon Customer’s Request | ||||
| Mechanical Specification | HPA 0.6 D 110 FR | HPA 0.8 D 110 FR | HPA 1.2 D 110 FR | HPA 1.5 D 110 FR | HPA 1.8 D 110 FR |
| Net Weight2 | 14 kg | 26 kg | 48 kg | 85 kg | 146 kg |
| Antenna Pointing Range | HPA 0.6 D 110 FR | HPA 0.8 D 110 FR | HPA 1.2 D 110 FR | HPA 1.5 D 110 FR | HPA 1.8 D 110 FR |
| Azimuth fine | ±20° | ±20° | ±15° | ±5° | ±5° |
| Elevation fine | ±30° | ±30° | ±20° | ±5° | ±5° |
| Material and Finish | HPA 0.6 D 110 FR | HPA 0.8 D 110 FR | HPA 1.2 D 110 FR | HPA 1.5 D 110 FR | HPA 1.8 D 110 FR |
| Mount | Hot-Dip-Galvanized Steel | ||||
| Installation Hardware | Stainless Steel | ||||
| Feed | Aluminium | ||||
| Environmental Specification | HPA 0.6 D 110 FR | HPA 0.8 D 110 FR | HPA 1.2 D 110 FR | HPA 1.5 D 110 FR | HPA 1.8 D 110 FR |
| Operating Windspeed | 120 km/h | ||||
| Survival Windspeed | 220 km/h | ||||
| Ambient Temperature | −55°C…+55°C | ||||
| ETSI Standard | HPA 0.6 D 110 FR | HPA 0.8 D 110 FR | HPA 1.2 D 110 FR | HPA 1.5 D 110 FR | HPA 1.8 D 110 FR |
| Range | 1 | 1 | 1 | 1 | 1 |
| Class | 3 | 3 | 3 | 3 | 3 |
1 Circular waveguide with 20 mm diameter, or direct mounted Orthomode transducer with ODU interfaces and/or standard waveguide flanges.
For more information about orthomode transducers please visit the OMT page.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.
