| Electrical Specification | HPA 0.3 S 280 SR | HPA 0.4 S 280 FR | HPA 0.6 S 280 FR | HPA 0.8 S 280 FR | HPA 1.2 S 280 FR |
| Operating Frequency | 27.500–29.500 GHz | ||||
| Diameter | 0.3 m | 0.4 m | 0.6 m | 0.8 m | 1.2 m |
| Gain mid-band | 36.6 dBi | 39.1 dBi | 42.3 dBi | 44.6 dBi | 48.1 dBi |
| Polarization | Linear Simplex (Vertical or Horizontal) | ||||
| Half-Power Beamwidth | 2.3° | 1.7° | 1.2° | 0.9° | 0.6° |
| Return Loss | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB |
| Front-to-Back Ratio | 63 dB | 66 dB | 69 dB | 71 dB | 74 dB |
| Cross-Polar Discrimination | 30 dB | 30 dB | 30 dB | 30 dB | 30 dB |
| Flange1 | Upon Customer’s Request | ||||
| Mechanical Specification | HPA 0.3 S 280 SR | HPA 0.4 S 280 FR | HPA 0.6 S 280 FR | HPA 0.8 S 280 FR | HPA 1.2 S 280 FR |
| Net Weight2 | 10 kg | 11 kg | 14 kg | 26 kg | 48 kg |
| Antenna Pointing Range | HPA 0.3 S 280 SR | HPA 0.4 S 280 FR | HPA 0.6 S 280 FR | HPA 0.8 S 280 FR | HPA 1.2 S 280 FR |
| Azimuth fine | ±20° | ±20° | ±20° | ±20° | ±15° |
| Elevation fine | ±30° | ±30° | ±30° | ±30° | ±20° |
| Material and Finish | HPA 0.3 S 280 SR | HPA 0.4 S 280 FR | HPA 0.6 S 280 FR | HPA 0.8 S 280 FR | HPA 1.2 S 280 FR |
| Mount | Hot-Dip-Galvanized Steel | ||||
| Installation Hardware | Stainless Steel | ||||
| Feed | Aluminium | ||||
| Environmental Specification | HPA 0.3 S 280 SR | HPA 0.4 S 280 FR | HPA 0.6 S 280 FR | HPA 0.8 S 280 FR | HPA 1.2 S 280 FR |
| Operating Windspeed | 120 km/h | ||||
| Survival Windspeed | 220 km/h | ||||
| Ambient Temperature | −55°C…+55°C | ||||
| ETSI Standard | HPA 0.3 S 280 SR | HPA 0.4 S 280 FR | HPA 0.6 S 280 FR | HPA 0.8 S 280 FR | HPA 1.2 S 280 FR |
| Range | 4 | 4 | 4 | 4 | 4 |
| Class | 3 | 3 | 3 | 3 | 3 |
1 Standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.
| Electrical Specification | HPA 0.3 D 280 SR | HPA 0.4 D 280 FR | HPA 0.6 D 280 FR | HPA 0.8 D 280 FR | HPA 1.2 D 280 FR |
| Operating Frequency | 27.500–29.500 GHz | ||||
| Diameter | 0.3 m | 0.4 m | 0.6 m | 0.8 m | 1.2 m |
| Gain mid-band | 36.6 dBi | 39.1 dBi | 42.3 dBi | 44.6 dBi | 48.1 dBi |
| Polarization | Linear Duplex (Vertical and Horizontal) | ||||
| Half-Power Beamwidth | 2.3° | 1.7° | 1.2° | 0.9° | 0.6° |
| Return Loss | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB | −17.7 dB |
| Front-to-Back Ratio | 63 dB | 66 dB | 69 dB | 71 dB | 74 dB |
| Cross-Polar Discrimination | 30 dB | 30 dB | 30 dB | 30 dB | 30 dB |
| Flange1 | Upon Customer’s Request | ||||
| Mechanical Specification | HPA 0.3 D 280 SR | HPA 0.4 D 280 FR | HPA 0.6 D 280 FR | HPA 0.8 D 280 FR | HPA 1.2 D 280 FR |
| Net Weight2 | 10 kg | 11 kg | 14 kg | 26 kg | 48 kg |
| Antenna Pointing Range | HPA 0.3 D 280 SR | HPA 0.4 D 280 FR | HPA 0.6 D 280 FR | HPA 0.8 D 280 FR | HPA 1.2 D 280 FR |
| Azimuth fine | ±20° | ±20° | ±20° | ±20° | ±15° |
| Elevation fine | ±30° | ±30° | ±30° | ±30° | ±20° |
| Material and Finish | HPA 0.3 D 280 SR | HPA 0.4 D 280 FR | HPA 0.6 D 280 FR | HPA 0.8 D 280 FR | HPA 1.2 D 280 FR |
| Mount | Hot-Dip-Galvanized Steel | ||||
| Installation Hardware | Stainless Steel | ||||
| Feed | Aluminium | ||||
| Environmental Specification | HPA 0.3 D 280 SR | HPA 0.4 D 280 FR | HPA 0.6 D 280 FR | HPA 0.8 D 280 FR | HPA 1.2 D 280 FR |
| Operating Windspeed | 120 km/h | ||||
| Survival Windspeed | 220 km/h | ||||
| Ambient Temperature | −55°C…+55°C | ||||
| ETSI Standard | HPA 0.3 D 280 SR | HPA 0.4 D 280 FR | HPA 0.6 D 280 FR | HPA 0.8 D 280 FR | HPA 1.2 D 280 FR |
| Range | 4 | 4 | 4 | 4 | 4 |
| Class | 3 | 3 | 3 | 3 | 3 |
1 Circular waveguide with 8 mm diameter, or direct mounted Orthomode transducer with ODU interfaces and/or standard waveguide flanges.
For more information about orthomode transducers please visit the OMT page.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.
