| Electrical Specification | HPA 0.8 S 44 FR | HPA 1.2 S 44 FR | HPA 1.5 S 44 FR | HPA 1.8 S 44 FR |
| Operating Frequency | 4.400–5.000 GHz | |||
| Diameter | 0.8 m | 1.2 m | 1.5 m | 1.8 m |
| Gain mid-band | 28.7 dBi | 32.2 dBi | 34.4 dBi | 35.9 dBi |
| Polarization | Linear Simplex (Vertical or Horizontal) | |||
| Half-Power Beamwidth | 5.6° | 3.7° | 3.0° | 2.5° |
| Return Loss | −20.8 dB | −23.1 dB | −26.4 dB | −30.7 dB |
| Front-to-Back Ratio | 56 dB | 58 dB | 60 dB | 62 dB |
| Cross-Polar Discrimination | 30 dB | 30 dB | 30 dB | 30 dB |
| Flange1 | Upon Customer’s Request | |||
| Mechanical Specification | HPA 0.8 S 44 FR | HPA 1.2 S 44 FR | HPA 1.5 S 44 FR | HPA 1.8 S 44 FR |
| Net Weight2 | 26 kg | 62 kg | 85 kg | 146 kg |
| Antenna Pointing Range | HPA 0.8 S 44 FR | HPA 1.2 S 44 FR | HPA 1.5 S 44 FR | HPA 1.8 S 44 FR |
| Azimuth fine | ±20° | ±15° | ±5° | ±5° |
| Elevation fine | ±30° | ±20° | ±5° | ±5° |
| Material and Finish | HPA 0.8 S 44 FR | HPA 1.2 S 44 FR | HPA 1.5 S 44 FR | HPA 1.8 S 44 FR |
| Mount | Hot-Dip-Galvanized Steel | |||
| Installation Hardware | Stainless Steel | |||
| Feed | Aluminium | |||
| Environmental Specification | HPA 0.8 S 44 FR | HPA 1.2 S 44 FR | HPA 1.5 S 44 FR | HPA 1.8 S 44 FR |
| Operating Windspeed | 120 km/h | |||
| Survival Windspeed | 220 km/h | |||
| Ambient Temperature | −55°C…+55°C | |||
| ETSI Standard | HPA 0.8 S 44 FR | HPA 1.2 S 44 FR | HPA 1.5 S 44 FR | HPA 1.8 S 44 FR |
| Range | 1 | 1 | 1 | 1 |
| Class | 2 | 3 | 3 | 3 |
1 N connector, standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system and side strut are included.
| Electrical Specification | HPA 0.8 D 44 FR | HPA 1.2 D 44 FR | HPA 1.5 D 44 FR | HPA 1.8 D 44 FR |
| Operating Frequency | 4.400–5.000 GHz | |||
| Diameter | 0.8 m | 1.2 m | 1.5 m | 1.8 m |
| Gain mid-band | 28.5 dBi | 32.0 dBi | 34.2 dBi | 35.7 dBi |
| Polarization | Linear Duplex (Vertical and Horizontal) | |||
| Half-Power Beamwidth | 5.6° | 3.7° | 3.0° | 2.5° |
| Return Loss | −20.8 dB | −20.8 dB | −23.1 dB | −28.3 dB |
| Front-to-Back Ratio | 56 dB | 58 dB | 60 dB | 62 dB |
| Cross-Polar Discrimination | 30 dB | 30 dB | 30 dB | 30 dB |
| Inter-Port Isolation | 40 dB | 40 dB | 40 dB | 40 dB |
| Flange2 | Upon Customer’s Request | |||
| Mechanical Specification | HPA 0.8 D 44 FR | HPA 1.2 D 44 FR | HPA 1.5 D 44 FR | HPA 1.8 D 44 FR |
| Net Weight2 | 26 kg | 62 kg | 85 kg | 146 kg |
| Antenna Pointing Range | HPA 0.8 D 44 FR | HPA 1.2 D 44 FR | HPA 1.5 D 44 FR | HPA 1.8 D 44 FR |
| Azimuth fine | ±20° | ±15° | ±5° | ±5° |
| Elevation fine | ±30° | ±20° | ±5° | ±5° |
| Material and Finish | HPA 0.8 D 44 FR | HPA 1.2 D 44 FR | HPA 1.5 D 44 FR | HPA 1.8 D 44 FR |
| Mount | Hot-Dip-Galvanized Steel | |||
| Installation Hardware | Stainless Steel | |||
| Feed | Aluminium | |||
| Environmental Specification | HPA 0.8 D 44 FR | HPA 1.2 D 44 FR | HPA 1.5 D 44 FR | HPA 1.8 D 44 FR |
| Operating Windspeed | 120 km/h | |||
| Survival Windspeed | 220 km/h | |||
| Ambient Temperature | −55°C…+55°C | |||
| ETSI Standard | HPA 0.8 D 44 FR | HPA 1.2 D 44 FR | HPA 1.5 D 44 FR | HPA 1.8 D 44 FR |
| Range | 1 | 1 | 1 | 1 |
| Class | 2 | 3 | 3 | 3 |
1 N connector, standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interface). Clamps, adjustment system and side strut are included.
